| • Chemical Sealed Diaphragm Pressure Gauges- |
• Type - Economic |
• Special Features-
- Ranges From Vaccum To 250 kg/cm2.
- Diaphragm Directly Welded To Top Chamber.
- Easy To Clean.
- Easy To Change Process Connection / Bottom Chamber.
- Suitable For General Purpose Application.
- Flanges Or Screwed Connection.
- Accuracy Available ( + - 1 % Of Full Scale ).
- Standard Followed In General En – 837 – 3.
|
Diaphragm Gauges |
|
| • Product Specification- |
| Technical Issues |
Specifications |
| • Gauge Part- |
| • Size Available |
100 Mm – 150 Mm |
| • Accuracy (Of Full Scale) |
1.6% |
| • Ambient Temperature (Deg C) |
-25 + 65 Deg C |
| • Process Temperature (Deg C) |
-40 To 200 Deg C |
| • Operating Pressure (% Of The Scale Value) |
75% |
| • Over Pressure Limit ( Upto 250 Kg/Cm2 ) |
30% |
| • Case |
SS 304 |
| • Ring |
SS 304 |
| • Joints |
Tig Argon Arc |
| • Socket |
SS 316 ( Two Part) |
| • Bourdon |
SS 316 |
| • Movement |
SS 304 |
| • Dial (Black Graduation On White Back Ground) |
Alluminium |
| • Pointer (Micro Meter Zero Adjustable) |
Alluminium / Black |
| • Protection |
IP – 65 |
| • Blow Out Disc |
Neoprene |
| • Gasket |
Neoprene |
| • Filling Plus |
Neoprene |
| • Window |
Sheet Glass |
| • Sealed Part - |
| • Filling Fluid |
Silicon Oil |
| • Diaphragm |
A I S I 316L |
| • Top Chamber |
304 SS |
| • Bottom Chamber |
316 Ss |
| • Nut / Bolts |
SS 304 |
| • Slip Ring (Tension Flange) |
MSPowder Coated |
| • Gasket |
PTFE |
|
| • Option - |
Glycerine Filled Version -
- Accuracy ---------------------------------------------------------- 1.6%.
- Ambient Temperature ------------------------------------------ Max 65 Deg C.
- Process Temperature ------------------------------------------- Max 65 Deg C.
- Dampining Liquid ------------------------------------------------- Glycerine 98%. |
| •Note :Standard Diaphragm Seals Are Of Slip Ring Coupled Type As Mentioned Above. |
• Other Seals Are Also Available On Request :
1. Direct Coupled Type ( Solid Drawn ).
2. Heavy Duty Welded Type ( Single Piece Design Screwed End ).
3. Direct Coupled Type ( Low Cost Solution , Suitable For 63 Mm Dial Pressure Gauges ).
4. S M S / Floating Type ( Easy To Connect & Disconnect ) Mainly For Food / Beverages / Dairy & Pharmecuticals Industries.
5. 3 / 4 “ Bsp Screwed Flush Type ( One Piece Construction / No Bolts & Gasket / Flush Diaphragm ) Suitable For 63 Mm Pressure Gauge.
6. Sanitory Seal ( Tri Clover With & Without Clamp ) 1 / 2 “ Sanitory Seal.
7. “I” Section Type ( “I” Section Extension To Facilitate Small Flange Connection ) Process Connection – Flange ( As Per Din / Bs / Ansi / Jis ).
8. Direct Flange Flush Type ( Flush Diaphragm Provided And Easy To Flush And Are More Suitable For Slurry And Corosive Services ) Flange Is Available As Per Din / Bs / Ansi / Jis Standards.
9. Direct Flang Inset Type ( Not Recommended For Flanges Size 1” & Below ) Most Suitable For Slurry And Corrosive Applications Flange ( As Per Din / Bs / Ansi / Jis ).
10. Customised Seal As Per Application.
|
